It's been a busy week or two here. I have been stamping just haven't had time to upload anything onto the computer...hopefully I'll get that done within the next day or so. Thanks for your patience.
Gina
June 28, 2012
June 19, 2012
Soft Butterflies
Soft Suede is like my go to color. I can't seem to get away from it, but that's okay. :) This card was pretty easy, but I love it. Love the postage punch and these butterflies together.
I used Soft Suede as the base and matted a soft suede dsp from the Comfort cafe DSP. The "messy" bow is Soft Suede Taffeta ribbon (love this ribbon too!). Inked up the butterflies using the soft suede marker and punched them out with the postage stamp punch. In some scrap paper I cut a 1" square to mask the outter edge of the punch so I could sponge the butterflies without getting the edges. They're sponged in Crumb Cake ink. It would have been so much easier with the 1" circle punch, but I didn't have it so I improvised. I lightly inked up the edges with Soft Suede ink and a sponge and adhered them to a piece of very Vanilla card stock just slightly bigger than all the punches together and matted that on Crumb Cake; popped it up with dimensionals. Added the thinking of you from the teeny tiny wishes stamp set and matted it on Soft suede. Pretty simple card to put together and i'm loving it!!!
Stampin' Supplies:
Stamps: Teeny Tiny Wishes and Kindness Matters
Paper: Soft Suede, Very Vanilla and Crumb Cake
Ink: Soft Suede and Crumb Cake
Accessories: Postage Stamp Punch, soft suede ribbon and Comfort Cafe DSP
Thanks for stopping by hope you enjoyed it!
Gina
I used Soft Suede as the base and matted a soft suede dsp from the Comfort cafe DSP. The "messy" bow is Soft Suede Taffeta ribbon (love this ribbon too!). Inked up the butterflies using the soft suede marker and punched them out with the postage stamp punch. In some scrap paper I cut a 1" square to mask the outter edge of the punch so I could sponge the butterflies without getting the edges. They're sponged in Crumb Cake ink. It would have been so much easier with the 1" circle punch, but I didn't have it so I improvised. I lightly inked up the edges with Soft Suede ink and a sponge and adhered them to a piece of very Vanilla card stock just slightly bigger than all the punches together and matted that on Crumb Cake; popped it up with dimensionals. Added the thinking of you from the teeny tiny wishes stamp set and matted it on Soft suede. Pretty simple card to put together and i'm loving it!!!
Stampin' Supplies:
Stamps: Teeny Tiny Wishes and Kindness Matters
Paper: Soft Suede, Very Vanilla and Crumb Cake
Ink: Soft Suede and Crumb Cake
Accessories: Postage Stamp Punch, soft suede ribbon and Comfort Cafe DSP
Thanks for stopping by hope you enjoyed it!
Gina
June 18, 2012
Calypso Collage
I started with a Crumb Cake Base added a strip of Calypso Coral cut with the Adorning Accents Edgelits (Item # 125595; $9.95). I stamped the frame image in Calypso Coral onto the base and cut out the center. I stamped the leafy image onto Vanilla cardstock, stamping it a couple more times without reinking. I stamped the "label image" in soft suede directly onto the same vanilla cardstock. On some scrap pieces of cardstock I inked up the rose in calypso coral stamped it off on to scrap piece of paper and stamped it onto very vanilla cardstock. I inked up the thanks so much from Tiny tags in soft suede and stamped it onto the rose and punched out with the 3/4" circle punch and popped it up with dimensionals. I stamped the butterfly in calypso coral and cut it out, added a crumb cake brad and popped it up with dimensionals. Lastly, added some soft suede taffeta ribbon and tied it in a knot.
Stampin' Supplies: (All Stampin' Up! unless otherwise noted)
Stamps: Papaya Collage and Tiny Tags
Ink: Soft Suede and Calypso Coral
Paper: Crumb Cake,Calypso Coral and very Vanilla
Accessories: Adorning Accents Edgelits, 3/4" Circle Punch, Neutral brads, Soft Suede Taffeta Ribbon and dimensionals
Thanks for stopping by! Hope you enjoyed the card.
Gina
June 15, 2012
Artistic Cobbler
I tried making one of those messy bow things...not sure what they are really supposed to be called but you can find the video here and thats what I came up with. It looks a lot better in person, but my camera is very old and I don't have the greatest lighting either. oh well...anyway...I didn't have the crinkled ribbon so I just used the seam binding I did have. Once I had the ribbon done I wanted to make a card with it.
I used Basic Black as the Base of the card and added a Very Vanilla DSP from the Designer Series Paper Stack Neutral collection (Item # 117157; $21.95). I took some "scrap" (just a piece I had from one of my classes that I didn't use) Glossy White Paper (Item # 102599; $5.95) I stamped the Eiffel Tower image in Versamark onto the Glossy White and added black embossing powder and Heated with heat tool. With a Brayer I added Cherry Cobbler Ink, after wiping off the excess ink I matted it onto Basic Black cardstock and adhered it over the Vanilla DSP. I stamped the sentiment from language of Friendship in Basic Black and stamped it on Very Vanilla cardstock, punched it out with the Decorative Label punch and inked the edges with Cherry Cobbler ink and a sponge.
Stampin' Supplies: (all Stampin' Up! unless otherwise noted)
Stamps: Artistic Etchings and language of Friendship
Ink: Cherry Cobbler, Basic Black and Versamark
Paper: Basic Black, Glossy white, Vanilla and Neutral DSP pack
Accessories: Decorative Label, Black embossing powder, sponges and cherry cobbler seam binding ribbon and Brayer
Thanks for Stopping by!
Gina
I used Basic Black as the Base of the card and added a Very Vanilla DSP from the Designer Series Paper Stack Neutral collection (Item # 117157; $21.95). I took some "scrap" (just a piece I had from one of my classes that I didn't use) Glossy White Paper (Item # 102599; $5.95) I stamped the Eiffel Tower image in Versamark onto the Glossy White and added black embossing powder and Heated with heat tool. With a Brayer I added Cherry Cobbler Ink, after wiping off the excess ink I matted it onto Basic Black cardstock and adhered it over the Vanilla DSP. I stamped the sentiment from language of Friendship in Basic Black and stamped it on Very Vanilla cardstock, punched it out with the Decorative Label punch and inked the edges with Cherry Cobbler ink and a sponge.
Stampin' Supplies: (all Stampin' Up! unless otherwise noted)
Stamps: Artistic Etchings and language of Friendship
Ink: Cherry Cobbler, Basic Black and Versamark
Paper: Basic Black, Glossy white, Vanilla and Neutral DSP pack
Accessories: Decorative Label, Black embossing powder, sponges and cherry cobbler seam binding ribbon and Brayer
Thanks for Stopping by!
Gina
June 12, 2012
Wisteria Flowers
Card Supplies: Stamps: Field Flowers
Paper: Wisteria Wonder, Elegant Eggplant, Very Vanilla and Lucky Limeade
Ink: Wisteria wonder, Elegant Eggplant, Lucky Limeade, Chocolate Chip, More Mustard (stamped off and stamped again)
Accessories: Wisteria wonder ruffled ribbon, scallop trim border
I started off stamping the stems in Lucky Limeade. Then, I stamped the more solid image of the flowers in wisteria wonder and then topped them with the out lined image inked in Elegant Eggplant. Added the centers, by stamping in more mustard. I stamped the sentiment from the set in chocolate chip ink. Added the scallop trim border and the ribbon and called it good.
I love the colors Elegant Eggplant and Wisteria Wonder together especially with the stamp set Field Flowers. Pretty simple card, but I love it. One of my favorites so far. I think I need to play with this set a little more. Thanks for stopping by!
Gina
Labels:
cards,
field flowers,
incolor,
scallop border trim
June 11, 2012
Gently Starfruit
Card Measurements:
Elegant Eggplant: 4 ¼ x 5 ½,
2 ½ x 2 ⅝
Summer
Starfruit: 4 x 1 ½,
2 ⅜ x 2 ½
Twitterpated
DSP: 4 x 5 ¼
Naturals
White: 2 ¼ x 2 ⅜
Stampin'
Supplies:
Stamps: Gently
Falling, Just believeInk: Summer Starfruit, Baja breeze
Paper: Elegant Eggplant, Summer Starfruit, Baja Breeze and Natural White
Accessories: Elegant Eggplant Scallop Dots Ribbon, Framelits Bitty Banners (Item # 129267; $14.95) and Twitterpated DSP, stampin' dimensionals.
Hello! It's been a while since I've
done anything with my blog. I decided to start posting on my blog
more. I decided to play with the new In colors. Since I first saw
them I knew I would have a hard time using Summer Starfruit so I
decided to use that one first... I started with a color combo from
the color coach. The colors are Elegant Eggplant (Regals
collection), Summer Starfruit (2012-2013 Incolor) and Baja Breeze
(Subtles collection). Then I went through my DSP and found something
with a tone on tone look and ended up using a Baja Breeze sheet from
the Twitterpated DSP pack. I decided by base was going to be Elegant
Eggplant since that's what was sitting on my desk from a card I made
earlier. I adhered the Baja Breeze DSP to the card base. Then I
wrapped the Scalloped dots ribbon around the summer starfruit piece
of cardstock and adhered that to the DSP. I then inked up my image
and stamped off (making it a lighter version of summer starfruit) on
to scrap paper before stamping onto Naturals white cardstock. With
the outlined image of the same stamp I inked it in Summer starfruit,
but left it at it's true color...making it a darker outline than the
“inside” of the leaf. I adhered the image to a piece of summer
starfruit and popped that up on to a piece of elegant eggplant. I
adhered the focal piece so it would over lap the strip of summer
starfruit. I stamped the “thank you” from Just believe stamp
set and ran it through the big shot with the bitty banners framelits
die. At first, I didn't really like the card all that much, but it
grew on me after a while. Thanks for stopping by.
Gina
Subscribe to:
Posts (Atom)